امتیاز موضوع:
  • 1 رأی - میانگین امتیازات: 4
  • 1
  • 2
  • 3
  • 4
  • 5
بحث علمی دلیل انتقال حرارت در لوله های گردبادی بین گردباد داخلی و خارجی چیست؟ vortex tube
#1
Bug 
سلام دوستان
من تازه با این انجمن آشنا شدم .
رشته من تاسیسات هستش و سوالی که خیلی فکر منو مشغول کرده اینه که انتقال حرارت بین دو هوای مارپیچ که در لوله های گردبادی از بین هم عبور می کنن دلیلش چیه چرا این انتقال حرارت انجام میشه؟
من خودم چند تا مطلب انگلیسی رو ترجمه کردم ولی حرفی از نحوه انتقال حرارت بین گردباد داخلی و گردباد خارجی نزده بود ممنون میشم اگر کسی اطلاعاتی داره با ما به اشتراک بزاره.

[تصویر:  Tube_de_Ranque-Hilsch.png]

[تصویر:  Vortex_Tube.img_assist_custom.JPG]



پاسخ


 سپاس شده توسط vahid ، capra1
#2
Bug 
دوستان سلام مجدد
مطلب جدیدی که در این مورد پیدا کردم 6 نظریه در این مورد ارائه کرده که من چیزی زیادی ازش متوجه نشدم اگر کسی زبانش خوبه و از نوشته های پایین سردرمیاره لطفا راهنمایی کنه.

1. While one airstream moves up the tube and the other down it, both rotate in the same direction at the same angular velocity. That is, a particle in the inner stream completes one rotation in the same amount of time as a particle in the outer stream. However, because of the principle of conservation of angular momentum (tendency of a rotating object to keep rotating at the same speed about the same axis of rotation), the rotational speed of the smaller vortex might be expected to increase. (The conservation principle is demonstrated by spinning skaters who can slow or speed up their spin by extending or drawing in their arms.) But in the vortex tube, the speed of the inner vortex remains the same. Angular momentum has been lost from the inner vortex. The energy that is lost shows up as heat in the outer vortex. Thus the outer vortex becomes warm, and the inner vortex is cooled.
2. Temperature is an average of how fast the particles are bumping into each other. Because it's an average, it means that air is composed of fast and slow (hot and cold) particles. A vortex tube merely separates the hot which goes to the peripheral of the spinning vortex and exhausts out the hot side and the cold air is diverted back through the center to exit the cold end.
3. Turbulent eddies (whirlpools) expanding and contracting are causing the heat transfer.
4. Adiabatic compression and adiabatic expansion is causing all the heat separation.
5. Acoustic streaming theory states there is a relationship between the acoustic resonance
frequencies and the forced vortex motion frequency. The energy separation inside the VT is due to the damping of the acoustic streaming along the axis of the tube towards the hot exhaust.
6. Secondary circulation states that some of the separation of heat is caused by a closed flow of medium inside the VT because studies show cumulative mass flow over the cross section of the vortex tube in the cold end direction, is larger than the cold exhaust flow.
All these theories focus on thermodynamics (compression and expansion), turbulent flow, viscous friction, internal heat transfer, acoustics and flow pattern.



پاسخ


 سپاس شده توسط vahid
#3
Bug 
منم درباره اش تحقیق کردم؛ ولی دلیل مشخصی براش بیان نشده.
البته بنظرم، نیروی گریز از مرکز ناشی از چرخش، لایه هوای درونی رو منبسط و لایه بیرونی رو متراکم میکنه و این عمل باعث میشه، لایه بیرونی داغ و لایه درونی سرد بشه.



پاسخ


 سپاس شده توسط hamidsg ، vahid
#4
Bug 
سلام
دوست عزیز بابت کمکت ممنونم
در این مورد تا اونجایی که من تحقیق کردم همین 6 نظریه که در ÷ست قبلی ارسال کردم وجود داره و گفتته شما یکی از این نظریه هاست .
من با چند تا از استادهای خودم موضوع رو مطرح کردم ولی هیچ کدوم اطلاعاتی در این مورد نداشتن و قراره به من جواب بدن که نتیجه رو همینجا اعلام می کنم.
خودم هم مطلب پست قبلو ترجمه کردم و همین چند روزی اینجا قرار می دم.
بازم اگر کسی از دوستان اطلاعاتی داره ممنون میشم به اشتراک بزاره.



پاسخ


 سپاس شده توسط ab.bb22 ، vahid
#5
سلام
این ترجمه شش نظریه بالا من بعضی از قسمتهاش رو خودم متوجه نشدم خوشحال میشم دوستان اگر چیزی بیشتر فهمیدن به اشتراک بزارن.


1. While one airstream moves up the tube and the other down it, both rotate in the same direction at the same angular velocity. That is, a particle in the inner stream completes one rotation in the same amount of time as a particle in the outer stream. However, because of the principle of conservation of angular momentum (tendency of a rotating object to keep rotating at the same speed about the same axis of rotation), the rotational speed of the smaller vortex might be expected to increase. (The conservation principle is demonstrated by spinning skaters who can slow or speed up their spin by extending or drawing in their arms.) But in the vortex tube, the speed of the inner vortex remains the same. Angular momentum has been lost from the inner vortex. The energy that is lost shows up as heat in the outer vortex. Thus the outer vortex becomes warm, and the inner vortex is cooled.
1- یک جریان از هوا دربالای جریان دیگر در لوله حرکت می کند و هردو در یک جهت و با سرعت زاویه ای یکسان می چرخند.یعنی یک دور چرخش یک ذره در جریان داخلی زمانی برابر با یک دور چرخش یک ذره در جریان خارجی صرف می کند.هرچند بدلیل اصل پایستگی تکانه زاویه ای ( تمایل یک شی دوار به حفظ چرخش در همان سرعت حول همان محور دوران است) ممکن است انتظار رود که سرعت چرخش گرداب کوچکتر افزایش یابد. (اصول حفظ چرخش توسط اسکیت باز که می تواند سرعت چرخشش را بوسیله باز و بسته کردن دستهایش افزایش و کاهش دهد.) اما در لوله گردابی سرعت گرداب درونی ثابت باقی می ماند. حرکت زاویه ای گرداب درونی کاهش می یابد. انرژی از دست رفته بصورت گرما در گرداب بیرونی جلوه می کند.بنابر این گرداب بیرونی گرم و گرداب درونی سرد می شود.

2. Temperature is an average of how fast the particles are bumping into each other. Because it's an average, it means that air is composed of fast and slow (hot and cold) particles. A vortex tube merely separates the hot which goes to the peripheral of the spinning vortex and exhausts out the hot side and the cold air is diverted back through the center to exit the cold end.
2-حرارت بطور متوسط حاصل سرعت ذرات و برخورد آنها به یکدیگر است.بطور متوسط منظور این است که هوا از ذرات با سرعت کم و با سرعت زیاد (سرد و گرم ) تشکیل شده است.لوله گردابی تنها جدا می کند گرما را و گرما از محیط جانبی گرداب از سمت گرم خارج می شود و هوای سرد از طریق مرکز به خروجی سرد انتهای لوله هدایت می شود.
3. Turbulent eddies (whirlpools) expanding and contracting are causing the heat transfer.
3-گردابهای متلاطم منبسط و منقبض می شوند و باعث انتقال حرارت می شوند.
4. Adiabatic compression and adiabatic expansion is causing all the heat separation.
4-فشرده سازی بی در رو (آدیاباتیک‌) و گسترش بی در رو باعث جدایی حرارت می شود.

5. Acoustic streaming theory states there is a relationship between the acoustic resonance
frequencies and the forced vortex motion frequency. The energy separation inside the VT is due to the damping of the acoustic streaming along the axis of the tube towards the hot exhaust.
5-نظریه جریانهای صوتی می گوید رابطه ای بین فرکانس رزونانس صوتی و فرکانس حرکت گرداب اجباری وجود دارد.جداسازی انرژی در ورتکس تیوب بدلیل نوسانات در جریانهای صوتی در طول محور لوله به سمت خروجی گرم است.

6. Secondary circulation states that some of the separation of heat is caused by a closed flow of medium inside the VT because studies show cumulative mass flow over the cross section of the vortex tube in the cold end direction, is larger than the cold exhaust flow.
All these theories focus on thermodynamics (compression and expansion), turbulent flow, viscous friction, internal heat transfer, acoustics and flow pattern.
6-حالت گردش ثانویه میگوید قسمتی از جدایی حرارت حاصل از یک جریان بسته داخل ورتکس تیوب است زیرا مطالعات نشان می دهد که جریان توده انباشته شده بیشتر از مقطع لوله گردابی در جهت انتهای سرد، بزرگتر از جریان خروجی سرد است.
همه این نظریه ها در ترمودینامیک تمرکزشان بر (فشرده سازی و انبساط )، جریان آشفته، اصطحکاک چسبناک، انتقال حرارت داخلی، آکوستیک و الگوی جریان است.



پاسخ


 سپاس شده توسط vahid ، mahmoud745
#6
سلام دوستان
کلیپهای زیر در یوتیوب میتونه کمک زیادی به درک مفهوم تکانه ی زاویه ای و در نتیجه نظریه ی شماره یک بکنه .(برای دانلود از یوتیوب میتونید از سایت tube.dooni.ir کمک بگیرید)

https://www.youtube.com/watch?v=UZlW1a63KZs

https://www.youtube.com/watch?v=0k276y9kuQQ

https://www.youtube.com/watch?v=NeXIV-wMVUk



پاسخ


 سپاس شده توسط مسابقه
#7
دو مقاله مفید در مورد Acoustic streaming theory در نظریه شماره 5
qqt.ir/Acoustic1
qqt.ir/Acoustic2



پاسخ


 سپاس شده توسط vahid ، TehranSD


موضوع‌های مشابه…
موضوع نویسنده پاسخ بازدید آخرین ارسال
  بحث علمی مینیمم و ماکسیمم درجه حرارت کویل سرمایشی در چیلر mrmtaha 6 8,300 04-24-2015، 02:40 AM
آخرین ارسال: mrmtaha

پرش به انجمن:


کاربرانِ درحال بازدید از این موضوع: 3 مهمان

فیلم های آموزشی مهندسی مکانیک - به زبان فارسی

بر روی موضوع مورد نظر خود کلیک کنید

آموزش پنیوماتیک آموزش نرم افزار Fluidsim آموزش ریخته گری با ProCast
آموزش کنترل صنعتی آموزش نرم افزار PDMS آموزش نرم افزار کامسول Comsol
آموزش شکل دادن فلزات آموزش نرم افزار Moldflow آموزش ماشین کاری با EdgeCAM
آموزش طراحی کنترل مقاوم آموزش Working Model آموزش پدیده انتقال در کامسول
آموزش حل معادلات دینامیکی آموزش نرم افزار LogoPress آموزش کنترل فعال با رویکرد فازی
آموزش تحلیل المان محدود آموزش‌های رایگان آموزش ریخته گری با ProCast