سوال swg - نسخه‌ی قابل چاپ +- انجمن تخصصی مهندسین مکانیک (http://forum.semeng.ir) +-- انجمن: دروس دوره کارشناسی (http://forum.semeng.ir/forum-17.html) +--- انجمن: دروس اصلی (http://forum.semeng.ir/forum-29.html) +---- انجمن: نقشه کشی صنعتی (http://forum.semeng.ir/forum-115.html) +---- موضوع: سوال swg (/thread-1600.html)

swg - kourosh72 - 12-28-2014 swg در نقشه کشی به چه معناست؟ connecting pipes 2 off 20 swg sweat in ports RE: swg - Dash @li - 12-31-2014 سلام والا از تاسیسات چیزی نمیدونم ولی زدم گوگل این اومد Standard wire gauge From Wikipedia, the free encyclopedia A standard wire gauge. British Standard Wire Gauge is a set of wire sizes given by BS 3737:1964 (now withdrawn), and is generally abbreviated to SWG. It is also known as: Imperial Wire Gauge or British Standard Gauge. Use of SWG sizes has fallen greatly in popularity, but is still used as a measure of thickness in guitar strings and some electrical wire. Cross sectional area in square millimetres is now a more popular size measurement. The current British Standard for metallic materials such as wire and sheet is BS 6722:1986, which is a solely metric standard. SWG was fixed by Order of Council August 23, 1883. It was constructed by improving the Birmingham Wire Gauge. It was made legal standard March 1, 1884 by the British Board of Trade. The basis of the system is the mil, or 0.001 in. No. 7/0, the largest size, is 0.50 in. (500 mils or 12.7 mm) in diameter, and the smallest, No. 50, is 0.001 in. (1 mil or about 25 µm) in diameter. Between each gauge, the weight diminishes by approximately 20%. Because the weight per unit length is related to the area, and therefore the square of the diameter, the diameter diminishes by approximately 10.6%: A table of wire gauges and diameters is shown below.[sup][1][/sup][sup][2][/sup] The relationship of diameter to gauge is piecewise linear, only approximating a (constant-ratio) exponential curve. British SWG (Standard Wire Gauge) diametersSWG in mm step